rsyncd.conf(5) 맨 페이지 - 윈디하나의 솔라나라

개요

섹션
맨 페이지 이름
검색(S)

rsyncd.conf(5)

rsyncd.conf(5)                                                  rsyncd.conf(5)



NAME
       rsyncd.conf - configuration file for rsync in daemon mode

SYNOPSIS
       rsyncd.conf

DESCRIPTION
       The  rsyncd.conf  file is the runtime configuration file for rsync when
       run as an rsync daemon.

       The rsyncd.conf  file  controls  authentication,  access,  logging  and
       available modules.

FILE FORMAT
       The  file  consists of modules and parameters. A module begins with the
       name of the module in square brackets and continues until the next mod‐
       ule begins. Modules contain parameters of the form "name = value".

       The  file is line-based -- that is, each newline-terminated line repre‐
       sents either a comment, a module name or a parameter.

       Only the first equals sign in a parameter  is  significant.  Whitespace
       before  or  after the first equals sign is discarded. Leading, trailing
       and internal whitespace in module and parameter  names  is  irrelevant.
       Leading  and  trailing  whitespace  in  a parameter value is discarded.
       Internal whitespace within a parameter value is retained verbatim.

       Any line beginning with a hash (#) is ignored, as are lines  containing
       only  whitespace.  (If  a hash occurs after anything other than leading
       whitespace, it is considered a part of the line's content.)

       Any line ending in a \ is "continued" on the next line in the customary
       UNIX fashion.

       The  values  following  the  equals sign in parameters are all either a
       string (no quotes needed) or a boolean, which may be given  as  yes/no,
       0/1  or  true/false.  Case is not significant in boolean values, but is
       preserved in string values.

LAUNCHING THE RSYNC DAEMON
       The rsync daemon is launched  by  specifying  the  --daemon  option  to
       rsync.

       The  daemon must run with root privileges if you wish to use chroot, to
       bind to a port numbered under 1024 (as is the default 873), or  to  set
       file  ownership.   Otherwise,  it must just have permission to read and
       write the appropriate data, log, and lock files.

       You can launch it either via inetd, as a stand-alone daemon, or from an
       rsync  client  via a remote shell.  If run as a stand-alone daemon then
       just run the command "rsync --daemon" from a suitable startup script.

       When run via inetd you should add a line like this to /etc/services:

         rsync           873/tcp


       and a single line something like this to /etc/inetd.conf:

         rsync   stream  tcp     nowait  root   /usr/bin/rsync rsyncd --daemon


       Replace  "/usr/bin/rsync"  with  the  path  to  where  you  have  rsync
       installed  on your system.  You will then need to send inetd a HUP sig‐
       nal to tell it to reread its config file.

       Note that you should not send the rsync daemon a HUP signal to force it
       to reread the rsyncd.conf file. The file is re-read on each client con‐
       nection.

GLOBAL PARAMETERS
       The first parameters in the file (before a  [module]  header)  are  the
       global  parameters.  Rsync also allows for the use of a "global" module
       name to indicate the start of one  or  more  global-parameter  sections
       (the name must be lower case).

       You  may  also  include any module parameters in the global part of the
       config file in which case the supplied value will override the  default
       for that parameter.

       You may use references to environment variables in the values of param‐
       eters.  String parameters will have %VAR% references expanded  as  late
       as  possible (when the string is used in the program), allowing for the
       use  of  variables  that  rsync  sets  at  connection  time,  such   as
       RSYNC_USER_NAME.   Non-string  parameters (such as true/false settings)
       are expanded when read from the config file.  If a  variable  does  not
       exist in the environment, or if a sequence of characters is not a valid
       reference (such as an un-paired percent sign), the raw  characters  are
       passed  through  unchanged.  This helps with backward compatibility and
       safety (e.g. expanding a non-existent %VAR% to an  empty  string  in  a
       path  could  result in a very unsafe path).  The safest way to insert a
       literal % into a value is to use %%.

       motd file
              This parameter allows you to specify a "message of the  day"  to
              display  to  clients on each connect. This usually contains site
              information and any legal notices. The default is no motd  file.
              This  can  be  overridden  by  the  --dparam=motdfile=FILE  com‐
              mand-line option when starting the daemon.

       pid file
              This parameter tells the rsync daemon to write its process ID to
              that  file.   If  the file already exists, the rsync daemon will
              abort rather than overwrite the file.  This can be overridden by
              the  --dparam=pidfile=FILE command-line option when starting the
              daemon.

       port   You can override the default port the daemon will listen  on  by
              specifying this value (defaults to 873).  This is ignored if the
              daemon is being run by inetd, and is superseded  by  the  --port
              command-line option.

       address
              You  can  override the default IP address the daemon will listen
              on by specifying this value.  This is ignored if the  daemon  is
              being  run  by  inetd,  and  is superseded by the --address com‐
              mand-line option.

       socket options
              This parameter can provide endless fun for people  who  like  to
              tune  their  systems to the utmost degree. You can set all sorts
              of socket options which may make transfers faster (or  slower!).
              Read  the  man page for the setsockopt() system call for details
              on some of the options you may be able to  set.  By  default  no
              special  socket  options  are  set.   These settings can also be
              specified via the --sockopts command-line option.

       listen backlog
              You can override the default backlog value when the daemon  lis‐
              tens for connections.  It defaults to 5.

MODULE PARAMETERS
       After the global parameters you should define a number of modules, each
       module exports a  directory  tree  as  a  symbolic  name.  Modules  are
       exported  by  specifying a module name in square brackets [module] fol‐
       lowed by the parameters for that module.  The module name  cannot  con‐
       tain  a slash or a closing square bracket.  If the name contains white‐
       space, each internal sequence of whitespace will be changed into a sin‐
       gle  space,  while  leading  or  trailing whitespace will be discarded.
       Also, the name cannot be "global" as that  exact  name  indicates  that
       global parameters follow (see above).

       As  with GLOBAL PARAMETERS, you may use references to environment vari‐
       ables in the values of parameters.  See the GLOBAL  PARAMETERS  section
       for more details.

       comment
              This  parameter specifies a description string that is displayed
              next to the module name when clients obtain a list of  available
              modules. The default is no comment.

       path   This  parameter specifies the directory in the daemon's filesys‐
              tem to make available in this module.   You  must  specify  this
              parameter for each module in rsyncd.conf.

              You  may base the path's value off of an environment variable by
              surrounding the variable name with percent signs.  You can  even
              reference  a  variable  that  is set by rsync when the user con‐
              nects.  For example, this would use the authorizing user's  name
              in the path:

                  path = /home/%RSYNC_USER_NAME%


              It  is fine if the path includes internal spaces -- they will be
              retained verbatim (which means that you shouldn't try to  escape
              them).   If  your final directory has a trailing space (and this
              is somehow not something you wish to  fix),  append  a  trailing
              slash to the path to avoid losing the trailing whitespace.

       use chroot
              If  "use  chroot"  is  true, the rsync daemon will chroot to the
              "path" before starting the file transfer with the client.   This
              has the advantage of extra protection against possible implemen‐
              tation security holes, but it has the disadvantages of requiring
              super-user  privileges,  of  not  being  able to follow symbolic
              links that are either absolute or outside of the new root  path,
              and of complicating the preservation of users and groups by name
              (see below).

              As an additional safety feature, you can specify  a  dot-dir  in
              the  module's  "path"  to  indicate  the  point where the chroot
              should occur.  This allows rsync to  run  in  a  chroot  with  a
              non-"/"  path for the top of the transfer hierarchy.  Doing this
              guards against unintended library loading (since those  absolute
              paths  will not be inside the transfer hierarchy unless you have
              used an unwise pathname), and lets you setup libraries  for  the
              chroot  that are outside of the transfer.  For example, specify‐
              ing  "/var/rsync/./module1"  will  chroot  to  the  "/var/rsync"
              directory  and set the inside-chroot path to "/module1".  If you
              had omitted the dot-dir, the chroot would have  used  the  whole
              path, and the inside-chroot path would have been "/".

              When "use chroot" is false or the inside-chroot path is not "/",
              rsync will: (1) munge symlinks by default for  security  reasons
              (see  "munge  symlinks"  for a way to turn this off, but only if
              you trust your users), (2) substitute leading slashes  in  abso‐
              lute  paths  with  the  module's  path  (so that options such as
              --backup-dir, --compare-dest, etc. interpret an absolute path as
              rooted  in the module's "path" dir), and (3) trim ".." path ele‐
              ments from args if rsync believes they would escape  the  module
              hierarchy.   The  default  for  "use chroot" is true, and is the
              safer choice (especially if the module is not read-only).

              When this parameter is enabled, the "numeric  ids"  option  will
              also  default  to  being  enabled (disabling name lookups).  See
              below for what a chroot needs in order for name lookups to  suc‐
              ceed.

              If  you  copy  the  necessary resources into the module's chroot
              area,  you  should  protect  them  through  your   OS's   normal
              user/group  or  ACL settings (to prevent the rsync module's user
              from being able to change them), and then  hide  them  from  the
              user's  view  via  "exclude"  (see how in the discussion of that
              parameter).  At that point it will be safe to enable the mapping
              of  users  and  groups  by  name  using the "numeric ids" daemon
              parameter (see below).

              Note also that you are free to setup custom user/group  informa‐
              tion  in the chroot area that is different from your normal sys‐
              tem.  For example, you could abbreviate the list  of  users  and
              groups.

       numeric ids
              Enabling this parameter disables the mapping of users and groups
              by name for the current daemon module.  This prevents the daemon
              from  trying  to load any user/group-related files or libraries.
              This enabling makes the transfer behave as  if  the  client  had
              passed  the --numeric-ids command-line option.  By default, this
              parameter  is  enabled  for  chroot  modules  and  disabled  for
              non-chroot modules.  Also keep in mind that uid/gid preservation
              requires the module to be running as root  (see  "uid")  or  for
              "fake super" to be configured.

              A  chroot-enabled  module should not have this parameter enabled
              unless you've taken steps to ensure that the module has the nec‐
              essary resources it needs to translate names, and that it is not
              possible for a user to change those  resources.   That  includes
              being  the  code  being able to call functions like getpwuid() ,
              getgrgid() , getpwname() , and getgrnam() ).   You  should  test
              what libraries and config files are required for your OS and get
              those setup before starting to test name mapping in rsync.

       munge symlinks
              This parameter tells rsync to modify all symlinks  in  the  same
              way  as  the  (non-daemon-affecting)  --munge-links command-line
              option (using a method described below).  This should help  pro‐
              tect  your  files  from user trickery when your daemon module is
              writable.  The default is disabled when "use chroot" is  on  and
              the inside-chroot path is "/", otherwise it is enabled.

              If you disable this parameter on a daemon that is not read-only,
              there are tricks that a user can play with uploaded symlinks  to
              access  daemon-excluded  items (if your module has any), and, if
              "use chroot" is off, rsync can even be tricked into  showing  or
              changing  data that is outside the module's path (as access-per‐
              missions allow).

              The way rsync disables the use of symlinks is to prefix each one
              with the string "/rsyncd-munged/".  This prevents the links from
              being used as long as that directory does not exist.  When  this
              parameter is enabled, rsync will refuse to run if that path is a
              directory or a symlink to a directory.  When  using  the  "munge
              symlinks"  parameter  in a chroot area that has an inside-chroot
              path of "/", you should add  "/rsyncd-munged/"  to  the  exclude
              setting for the module so that a user can't try to create it.

              Note:   rsync  makes  no attempt to verify that any pre-existing
              symlinks in the module's hierarchy are as safe as you want  them
              to  be  (unless,  of course, it just copied in the whole hierar‐
              chy).  If you setup an rsync daemon on a new area or locally add
              symlinks,  you  can  manually  protect  your symlinks from being
              abused by prefixing "/rsyncd-munged/" to the start of every sym‐
              link's  value.   There is a perl script in the support directory
              of the source code named "munge-symlinks" that can  be  used  to
              add or remove this prefix from your symlinks.

              When  this  parameter  is disabled on a writable module and "use
              chroot" is off (or the inside-chroot path is not "/"),  incoming
              symlinks  will be modified to drop a leading slash and to remove
              ".."  path elements that rsync believes will allow a symlink  to
              escape  the  module's  hierarchy.  There are tricky ways to work
              around this, though, so you had better trust your users  if  you
              choose this combination of parameters.

       charset
              This  specifies  the name of the character set in which the mod‐
              ule's filenames are stored.   If  the  client  uses  an  --iconv
              option, the daemon will use the value of the "charset" parameter
              regardless of the character  set  the  client  actually  passed.
              This allows the daemon to support charset conversion in a chroot
              module without extra files in the chroot area, and also  ensures
              that  name-translation  is  done in a consistent manner.  If the
              "charset" parameter is not set, the --iconv option  is  refused,
              just as if "iconv" had been specified via "refuse options".

              If  you wish to force users to always use --iconv for a particu‐
              lar module, add "no-iconv" to the  "refuse  options"  parameter.
              Keep  in  mind  that this will restrict access to your module to
              very new rsync clients.

       max connections
              This parameter allows you  to  specify  the  maximum  number  of
              simultaneous connections you will allow.  Any clients connecting
              when the maximum has been reached will receive a message telling
              them  to  try later.  The default is 0, which means no limit.  A
              negative value disables the module.  See also  the  "lock  file"
              parameter.

       log file
              When  the "log file" parameter is set to a non-empty string, the
              rsync daemon will log messages to the indicated file rather than
              using  syslog.  This  is particularly useful on systems (such as
              AIX) where syslog() doesn't work  for  chrooted  programs.   The
              file  is  opened  before  chroot()  is called, allowing it to be
              placed outside the transfer.  If this value is set on a per-mod‐
              ule basis instead of globally, the global log will still contain
              any authorization failures or config-file error messages.

              If the daemon fails to open the specified  file,  it  will  fall
              back  to  using  syslog  and  output an error about the failure.
              (Note that the failure to open the specified log file used to be
              a fatal error.)

              This  setting  can be overridden by using the --log-file=FILE or
              --dparam=logfile=FILE command-line options.   The  former  over‐
              rides  all  the log-file parameters of the daemon and all module
              settings.  The latter sets the daemon's log file and the default
              for  all the modules, which still allows modules to override the
              default setting.

       syslog facility
              This parameter allows you to specify the syslog facility name to
              use when logging messages from the rsync daemon. You may use any
              standard syslog facility name which is defined on  your  system.
              Common  names  are auth, authpriv, cron, daemon, ftp, kern, lpr,
              mail,  news,  security,  syslog,  user,  uucp,  local0,  local1,
              local2,  local3,  local4, local5, local6 and local7. The default
              is daemon.  This setting has no effect if the "log file" setting
              is  a  non-empty string (either set in the per-modules settings,
              or inherited from the global settings).

       max verbosity
              This parameter allows you to control the maximum amount of  ver‐
              bose information that you'll allow the daemon to generate (since
              the information goes into the log file). The default is 1, which
              allows the client to request one level of verbosity.

              This also affects the user's ability to request higher levels of
              --info and --debug logging.  If the max value is 2, then no info
              and/or  debug value that is higher than what would be set by -vv
              will be honored by the daemon in its logging.  To see  how  high
              of  a  verbosity  level  you  need  to  accept  for a particular
              info/debug  level,  refer  to  "rsync  --info=help"  and  "rsync
              --debug=help".   For  instance,  it  takes max-verbosity 4 to be
              able to output debug TIME2 and FLIST3.

       lock file
              This parameter specifies the file to use  to  support  the  "max
              connections"  parameter. The rsync daemon uses record locking on
              this file to ensure  that  the  max  connections  limit  is  not
              exceeded  for the modules sharing the lock file.  The default is
              /var/run/rsyncd.lock.

       read only
              This parameter determines whether clients will be able to upload
              files  or not. If "read only" is true then any attempted uploads
              will fail. If "read only" is false then uploads will be possible
              if  file  permissions on the daemon side allow them. The default
              is for all modules to be read only.

              Note that "auth users" can override this setting on  a  per-user
              basis.

       write only
              This  parameter determines whether clients will be able to down‐
              load files or not. If "write only" is true  then  any  attempted
              downloads  will  fail.  If  "write only" is false then downloads
              will be possible if file permissions on the  daemon  side  allow
              them.  The default is for this parameter to be disabled.

       list   This parameter determines whether this module is listed when the
              client asks for a listing of available modules.  In addition, if
              this is false, the daemon will pretend the module does not exist
              when a client denied by "hosts allow" or "hosts  deny"  attempts
              to  access  it.   Realize  that  if "reverse lookup" is disabled
              globally but enabled  for  the  module,  the  resulting  reverse
              lookup  to  a potentially client-controlled DNS server may still
              reveal to the client  that  it  hit  an  existing  module.   The
              default is for modules to be listable.

       uid    This  parameter  specifies  the  user  name or user ID that file
              transfers to and from that module should take place as when  the
              daemon  was run as root. In combination with the "gid" parameter
              this determines what file permissions are available. The default
              when  run  by a super-user is to switch to the system's "nobody"
              user.  The default for a non-super-user is to not try to  change
              the user.  See also the "gid" parameter.

              The  RSYNC_USER_NAME environment variable may be used to request
              that rsync run as the authorizing user.   For  example,  if  you
              want  a  rsync to run as the same user that was received for the
              rsync authentication, this setup is useful:

                  uid = %RSYNC_USER_NAME%
                  gid = *


       gid    This parameter specifies one or more group names/IDs  that  will
              be  used  when  accessing the module.  The first one will be the
              default group, and any extra ones be set as supplemental groups.
              You  may  also specify a "*" as the first gid in the list, which
              will be replaced by all the normal  groups  for  the  transfer's
              user  (see  "uid").   The default when run by a super-user is to
              switch to your OS's "nobody" (or perhaps "nogroup")  group  with
              no other supplementary groups.  The default for a non-super-user
              is to not change any group attributes (and indeed, your  OS  may
              not  allow  a  non-super-user  to try to change their group set‐
              tings).

       fake super
              Setting "fake super = yes" for a module causes the  daemon  side
              to  behave  as  if the --fake-super command-line option had been
              specified.  This allows the full attributes  of  a  file  to  be
              stored  without  having  to  have the daemon actually running as
              root.

       filter The daemon has its own filter chain that determines  what  files
              it  will  let  the client access.  This chain is not sent to the
              client and is independent of any filters  the  client  may  have
              specified.   Files  excluded  by  the  daemon filter chain (dae‐
              mon-excluded files) are treated as non-existent  if  the  client
              tries  to  pull  them,  are skipped with an error message if the
              client tries to push them (triggering exit  code  23),  and  are
              never  deleted  from  the module.  You can use daemon filters to
              prevent clients  from  downloading  or  tampering  with  private
              administrative  files,  such  as  files  you  may add to support
              uid/gid name translations.

              The daemon filter chain is built  from  the  "filter",  "include
              from",  "include",  "exclude from", and "exclude" parameters, in
              that order of priority.  Anchored patterns are anchored  at  the
              root of the module.  To prevent access to an entire subtree, for
              example, "/secret", you must exclude everything in the  subtree;
              the  easiest  way  to do this is with a triple-star pattern like
              "/secret/***".

              The "filter" parameter takes a space-separated  list  of  daemon
              filter  rules,  though it is smart enough to know not to split a
              token at an internal space in a rule (e.g. "- /foo  -  /bar"  is
              parsed  as  two  rules).  You may specify one or more merge-file
              rules using the normal syntax.  Only one "filter" parameter  can
              apply to a given module in the config file, so put all the rules
              you  want  in  a  single  parameter.   Note  that  per-directory
              merge-file  rules  do  not  provide as much protection as global
              rules, but they can be used to make --delete work better  during
              a  client  download  operation  if  the  per-dir merge files are
              included in the transfer and the client requests  that  they  be
              used.

       exclude
              This  parameter  takes  a space-separated list of daemon exclude
              patterns.  As with the client --exclude option, patterns can  be
              qualified   with   "-   "   or   "+  "  to  explicitly  indicate
              exclude/include.  Only one "exclude" parameter can  apply  to  a
              given  module.   See the "filter" parameter for a description of
              how excluded files affect the daemon.

       include
              Use an "include" to override the effects of the "exclude" param‐
              eter.  Only one "include" parameter can apply to a given module.
              See the "filter" parameter for a  description  of  how  excluded
              files affect the daemon.

       exclude from
              This  parameter  specifies the name of a file on the daemon that
              contains daemon  exclude  patterns,  one  per  line.   Only  one
              "exclude  from"  parameter  can  apply to a given module; if you
              have multiple exclude-from files, you  can  specify  them  as  a
              merge  file in the "filter" parameter.  See the "filter" parame‐
              ter for a description of how excluded files affect the daemon.

       include from
              Analogue of "exclude from" for a file  of  daemon  include  pat‐
              terns.   Only  one "include from" parameter can apply to a given
              module.  See the "filter" parameter for  a  description  of  how
              excluded files affect the daemon.

       incoming chmod
              This  parameter  allows  you to specify a set of comma-separated
              chmod strings that will affect the permissions of  all  incoming
              files  (files  that  are  being  received by the daemon).  These
              changes happen after all other permission calculations, and this
              will  even  override destination-default and/or existing permis‐
              sions when  the  client  does  not  specify  --perms.   See  the
              description of the --chmod rsync option and the chmod(1) manpage
              for information on the format of this string.

       outgoing chmod
              This parameter allows you to specify a  set  of  comma-separated
              chmod  strings  that will affect the permissions of all outgoing
              files (files that are being sent out from  the  daemon).   These
              changes  happen  first, making the sent permissions appear to be
              different than those  stored  in  the  filesystem  itself.   For
              instance,  you  could  disable  group  write  permissions on the
              server while having it appear to be on to the clients.  See  the
              description of the --chmod rsync option and the chmod(1) manpage
              for information on the format of this string.

       auth users
              This parameter specifies a comma and/or space-separated list  of
              authorization  rules.   In its simplest form, you list the user‐
              names that will be allowed to connect to this module. The  user‐
              names  do  not  need to exist on the local system. The rules may
              contain shell wildcard characters that will be  matched  against
              the username provided by the client for authentication. If "auth
              users" is set then the client will be  challenged  to  supply  a
              username  and  password  to  connect  to the module. A challenge
              response authentication protocol is used for this exchange.  The
              plain text usernames and passwords are stored in the file speci‐
              fied by the "secrets file" parameter. The  default  is  for  all
              users  to  be able to connect without a password (this is called
              "anonymous rsync").

              In addition to username  matching,  you  can  specify  groupname
              matching  via  a '@' prefix.  When using groupname matching, the
              authenticating username must be a real user on the system, or it
              will be assumed to be a member of no groups.  For example, spec‐
              ifying "@rsync" will match the authenticating user if the  named
              user is a member of the rsync group.

              Finally,  options  may  be  specified  after  a  colon (:).  The
              options allow you to "deny" a user or a group, set the access to
              "ro"  (read-only), or set the access to "rw" (read/write).  Set‐
              ting an auth-rule-specific ro/rw setting overrides the  module's
              "read only" setting.

              Be  sure  to  put  the  rules  in  the order you want them to be
              matched, because the checking stops at the first  matching  user
              or  group, and that is the only auth that is checked.  For exam‐
              ple:

                auth users = joe:deny @guest:deny admin:rw @rsync:ro susan joe sam


              In the above rule, user joe will  be  denied  access  no  matter
              what.   Any  user  that  is  in the group "guest" is also denied
              access.  The user "admin" gets access in  read/write  mode,  but
              only  if  the  admin  user  is not in group "guest" (because the
              admin user-matching rule would never be reached if the  user  is
              in  group "guest").  Any other user who is in group "rsync" will
              get read-only access.  Finally, users susan, joe,  and  sam  get
              the  ro/rw  setting  of  the module, but only if the user didn't
              match an earlier group-matching rule.

              See the description of the secrets file for  how  you  can  have
              per-user  passwords  as  well  as  per-group passwords.  It also
              explains how a user can authenticate using their  user  password
              or (when applicable) a group password, depending on what rule is
              being authenticated.

              See also the section entitled "USING RSYNC-DAEMON FEATURES VIA A
              REMOTE SHELL CONNECTION" in rsync(1) for information on how han‐
              dle  an  rsyncd.conf-level  username  that  differs   from   the
              remote-shell-level username when using a remote shell to connect
              to an rsync daemon.

       secrets file
              This parameter specifies the name of a file  that  contains  the
              username:password  and/or  @groupname:password  pairs  used  for
              authenticating this module. This file is only consulted  if  the
              "auth users" parameter is specified.  The file is line-based and
              contains one name:password pair per line.  Any line has  a  hash
              (#) as the very first character on the line is considered a com‐
              ment and is skipped.  The passwords can contain  any  characters
              but  be  warned  that many operating systems limit the length of
              passwords that can be typed at the client end, so you  may  find
              that passwords longer than 8 characters don't work.

              The  use of group-specific lines are only relevant when the mod‐
              ule is being authorized  using  a  matching  "@groupname"  rule.
              When  that  happens, the user can be authorized via either their
              "username:password" line or the "@groupname:password"  line  for
              the group that triggered the authentication.

              It  is  up  to  you  what  kind  of password entries you want to
              include, either users, groups, or both.  The use of group  rules
              in  "auth users" does not require that you specify a group pass‐
              word if you do not want to use shared passwords.

              There is no default for the "secrets file" parameter,  you  must
              choose a name (such as /etc/rsyncd.secrets).  The file must nor‐
              mally not be readable by "other"; see "strict  modes".   If  the
              file  is  not  found or is rejected, no logins for a "user auth"
              module will be possible.

       strict modes
              This parameter determines whether or not the permissions on  the
              secrets  file  will be checked.  If "strict modes" is true, then
              the secrets file must not be readable by any user ID other  than
              the  one  that  the  rsync  daemon is running under.  If "strict
              modes" is false, the check is not  performed.   The  default  is
              true.   This parameter was added to accommodate rsync running on
              the Windows operating system.

       hosts allow
              This parameter allows you to specify a list of patterns that are
              matched against a connecting clients hostname and IP address. If
              none of the patterns match then the connection is rejected.

              Each pattern can be in one of five forms:

              o      a dotted decimal IPv4 address of the form a.b.c.d, or  an
                     IPv6  address  of the form a:b:c::d:e:f. In this case the
                     incoming machine's IP address must match exactly.

              o      an address/mask in the form ipaddr/n where ipaddr is  the
                     IP  address  and  n is the number of one bits in the net‐
                     mask.  All IP addresses which match the masked IP address
                     will be allowed in.

              o      an  address/mask in the form ipaddr/maskaddr where ipaddr
                     is the IP address and maskaddr is the netmask  in  dotted
                     decimal  notation  for  IPv4,  or  similar for IPv6, e.g.
                     ffff:ffff:ffff:ffff:: instead of /64.  All  IP  addresses
                     which match the masked IP address will be allowed in.

              o      a  hostname  pattern  using wildcards. If the hostname of
                     the connecting IP (as determined  by  a  reverse  lookup)
                     matches the wildcarded name (using the same rules as nor‐
                     mal unix filename matching), the client  is  allowed  in.
                     This  only  works  if  "reverse  lookup"  is enabled (the
                     default).

              o      a hostname. A  plain  hostname  is  matched  against  the
                     reverse  DNS of the connecting IP (if "reverse lookup" is
                     enabled), and/or the IP of the given hostname is  matched
                     against   the  connecting  IP  (if  "forward  lookup"  is
                     enabled, as it is by default).  Any match will be allowed
                     in.


              Note  IPv6  link-local addresses can have a scope in the address
              specification:

                  fe80::1%link1
                  fe80::%link1/64
                  fe80::%link1/ffff:ffff:ffff:ffff::


              You can also combine "hosts allow" with a separate "hosts  deny"
              parameter.  If  both  parameters  are  specified then the "hosts
              allow" parameter is checked first and a  match  results  in  the
              client being able to connect. The "hosts deny" parameter is then
              checked and a match means that the host is rejected. If the host
              does not match either the "hosts allow" or the "hosts deny" pat‐
              terns then it is allowed to connect.

              The default is no "hosts allow" parameter, which means all hosts
              can connect.

       hosts deny
              This parameter allows you to specify a list of patterns that are
              matched against a connecting clients hostname and IP address. If
              the  pattern  matches  then  the connection is rejected. See the
              "hosts allow" parameter for more information.

              The default is no "hosts deny" parameter, which means all  hosts
              can connect.

       reverse lookup
              Controls  whether  the  daemon  performs a reverse lookup on the
              client's IP address to determine its hostname, which is used for
              "hosts allow"/"hosts deny" checks and the "%h" log escape.  This
              is enabled by default, but you may wish to disable  it  to  save
              time  if you know the lookup will not return a useful result, in
              which case the daemon will use the name "UNDETERMINED" instead.

              If this parameter is enabled globally (even by  default),  rsync
              performs  the  lookup as soon as a client connects, so disabling
              it for a module will not avoid the lookup.  Thus,  you  probably
              want  to disable it globally and then enable it for modules that
              need the information.

       forward lookup
              Controls whether the daemon performs a  forward  lookup  on  any
              hostname  specified  in an hosts allow/deny setting.  By default
              this is enabled, allowing the use of an explicit  hostname  that
              would not be returned by reverse DNS of the connecting IP.

       ignore errors
              This  parameter  tells rsyncd to ignore I/O errors on the daemon
              when deciding whether to run the delete phase of  the  transfer.
              Normally  rsync  skips  the --delete step if any I/O errors have
              occurred in order to prevent disastrous deletion due to a tempo‐
              rary  resource  shortage  or other I/O error. In some cases this
              test is counter productive so you can use this parameter to turn
              off this behavior.

       ignore nonreadable
              This  tells the rsync daemon to completely ignore files that are
              not readable by the user. This is  useful  for  public  archives
              that may have some non-readable files among the directories, and
              the sysadmin doesn't want those files to be seen at all.

       transfer logging
              This parameter enables per-file logging of downloads and uploads
              in  a  format somewhat similar to that used by ftp daemons.  The
              daemon always logs the transfer at the end, so if a transfer  is
              aborted, no mention will be made in the log file.

              If  you  want  to  customize the log lines, see the "log format"
              parameter.

       log format
              This parameter allows you to specify the format used for logging
              file  transfers when transfer logging is enabled.  The format is
              a  text  string  containing  embedded  single-character   escape
              sequences  prefixed  with  a percent (%) character.  An optional
              numeric field width may also be specified  between  the  percent
              and the escape letter (e.g. "%-50n %8l %07p").  In addition, one
              or more apostrophes may be specified prior to a numerical escape
              to  indicate  that  the  numerical  value  should  be  made more
              human-readable.  The 3 supported levels are the same as for  the
              --human-readable  command-line option, though the default is for
              human-readability to be off.  Each  added  apostrophe  increases
              the level (e.g. "%''l %'b %f").

              The  default log format is "%o %h [%a] %m (%u) %f %l", and a "%t
              [%p] " is always prefixed when using the "log  file"  parameter.
              (A  perl  script  that will summarize this default log format is
              included in the rsync source code distribution in the  "support"
              subdirectory: rsyncstats.)

              The single-character escapes that are understood are as follows:

              o      %a the remote IP address (only available for a daemon)

              o      %b the number of bytes actually transferred

              o      %B the permission bits of the file (e.g. rwxrwxrwt)

              o      %c the total size of the block checksums received for the
                     basis file (only when sending)

              o      %C the full-file MD5 checksum if --checksum is enabled or
                     a file was transferred (only for protocol 30 or above).

              o      %f the filename (long form on sender; no trailing "/")

              o      %G the gid of the file (decimal) or "DEFAULT"

              o      %h the remote host name (only available for a daemon)

              o      %i an itemized list of what is being updated

              o      %l the length of the file in bytes

              o      %L the string " -> SYMLINK", " => HARDLINK", or "" (where
                     SYMLINK or HARDLINK is a filename)

              o      %m the module name

              o      %M the last-modified time of the file

              o      %n the filename (short form; trailing "/" on dir)

              o      %o the operation, which is "send", "recv", or "del." (the
                     latter includes the trailing period)

              o      %p the process ID of this rsync session

              o      %P the module path

              o      %t the current date time

              o      %u the authenticated username or an empty string

              o      %U the uid of the file (decimal)


              For  a list of what the characters mean that are output by "%i",
              see the --itemize-changes option in the rsync manpage.

              Note that some of the logged output changes  when  talking  with
              older  rsync  versions.   For  instance, deleted files were only
              output as verbose messages prior to rsync 2.6.4.

       timeout
              This parameter allows you to override the clients choice for I/O
              timeout  for  this  module.  Using this parameter you can ensure
              that rsync won't wait on a dead client forever. The  timeout  is
              specified  in  seconds.  A value of zero means no timeout and is
              the default. A good choice for anonymous rsync  daemons  may  be
              600 (giving a 10 minute timeout).

       refuse options
              This  parameter  allows you to specify a space-separated list of
              rsync command line options that will be refused  by  your  rsync
              daemon.   You  may  specify the full option name, its one-letter
              abbreviation,  or  a  wild-card  string  that  matches  multiple
              options.  For example, this would refuse --checksum (-c) and all
              the various delete options:

                  refuse options = c delete


              The reason the above refuses all  delete  options  is  that  the
              options  imply  --delete,  and  implied options are refused just
              like explicit options.  As an  additional  safety  feature,  the
              refusal  of  "delete"  also refuses remove-source-files when the
              daemon is the sender; if you want the latter without the former,
              instead  refuse  "delete-*" -- that refuses all the delete modes
              without affecting --remove-source-files.

              When an option is refused, the daemon prints  an  error  message
              and  exits.   To prevent all compression when serving files, you
              can use "dont compress =  *"  (see  below)  instead  of  "refuse
              options = compress" to avoid returning an error to a client that
              requests compression.

       dont compress
              This parameter allows you to select filenames based on  wildcard
              patterns  that  should not be compressed when pulling files from
              the daemon (no analogous parameter exists to govern the  pushing
              of files to a daemon).  Compression is expensive in terms of CPU
              usage, so it is usually good to not try to compress  files  that
              won't compress well, such as already compressed files.

              The  "dont  compress"  parameter takes a space-separated list of
              case-insensitive wildcard patterns. Any source filename matching
              one of the patterns will not be compressed during transfer.

              See  the  --skip-compress  parameter in the rsync(1) manpage for
              the list of file suffixes that are not  compressed  by  default.
              Specifying a value for the "dont compress" parameter changes the
              default when the daemon is the sender.

       pre-xfer exec, post-xfer exec
              You may specify a command to be  run  before  and/or  after  the
              transfer.   If  the pre-xfer exec command fails, the transfer is
              aborted before it begins.  Any output from the script on  stdout
              (up  to several KB) will be displayed to the user when aborting,
              but is NOT displayed if the script returns success.  Any  output
              from  the script on stderr goes to the daemon's stderr, which is
              typically discarded (though see --no-detatch option for a way to
              see the stderr output, which can assist with debugging).

              The following environment variables will be set, though some are
              specific to the pre-xfer or the post-xfer environment:

              o      RSYNC_MODULE_NAME: The name of the module being accessed.

              o      RSYNC_MODULE_PATH: The path configured for the module.

              o      RSYNC_HOST_ADDR: The accessing host's IP address.

              o      RSYNC_HOST_NAME: The accessing host's name.

              o      RSYNC_USER_NAME: The accessing user's name (empty  if  no
                     user).

              o      RSYNC_PID: A unique number for this transfer.

              o      RSYNC_REQUEST: (pre-xfer only) The module/path info spec‐
                     ified by the user.  Note that the user can specify multi‐
                     ple  source  files,  so the request can be something like
                     "mod/path1 mod/path2", etc.

              o      RSYNC_ARG#: (pre-xfer only) The pre-request arguments are
                     set  in  these  numbered  values.  RSYNC_ARG0  is  always
                     "rsyncd", followed by  the  options  that  were  used  in
                     RSYNC_ARG1,  and  so  on.   There  will be a value of "."
                     indicating that the options are done and  the  path  args
                     are  beginning  --  these  contain similar information to
                     RSYNC_REQUEST, but with values separated and  the  module
                     name stripped off.

              o      RSYNC_EXIT_STATUS:  (post-xfer  only)  the  server side's
                     exit value.  This will be 0 for a successful run, a posi‐
                     tive  value  for an error that the server generated, or a
                     -1 if rsync failed to exit properly.  Note that an  error
                     that  occurs  on  the  client side does not currently get
                     sent to the server side, so this is not  the  final  exit
                     status for the whole transfer.

              o      RSYNC_RAW_STATUS:  (post-xfer  only)  the  raw exit value
                     from waitpid() .


              Even though the commands can be  associated  with  a  particular
              module,  they  are  run  using  the permissions of the user that
              started the daemon (not the module's  uid/gid  setting)  without
              any chroot restrictions.

CONFIG DIRECTIVES
       There are currently two config directives available that allow a config
       file to incorporate the contents of other files:  &include and  &merge.
       Both allow a reference to either a file or a directory.  They differ in
       how segregated the file's contents are considered to be.

       The &include directive treats each file as more distinct, with each one
       inheriting  the  defaults  of  the  parent file, starting the parameter
       parsing as globals/defaults, and leaving the defaults unchanged for the
       parsing of the rest of the parent file.

       The  &merge directive, on the other hand, treats the file's contents as
       if it were simply inserted in place of the directive, and thus  it  can
       set  parameters  in  a  module  started in another file, can affect the
       defaults for other files, etc.

       When an &include or &merge directive refers to  a  directory,  it  will
       read in all the *.conf or *.inc files (respectively) that are contained
       inside that directory (without any recursive scanning), with the  files
       sorted  into alpha order.  So, if you have a directory named "rsyncd.d"
       with the files "foo.conf", "bar.conf", and "baz.conf" inside  it,  this
       directive:

           &include /path/rsyncd.d


       would be the same as this set of directives:

           &include /path/rsyncd.d/bar.conf
           &include /path/rsyncd.d/baz.conf
           &include /path/rsyncd.d/foo.conf


       except  that  it adjusts as files are added and removed from the direc‐
       tory.

       The advantage of the &include directive is that you can define  one  or
       more  modules  in  a  separate  file  without worrying about unintended
       side-effects between the self-contained module files.

       The advantage of the &merge directive is that you can load config snip‐
       pets that can be included into multiple module definitions, and you can
       also set global values that  will  affect  connections  (such  as  motd
       file), or globals that will affect other include files.

       For example, this is a useful /etc/rsyncd.conf file:

           port = 873
           log file = /var/log/rsync.log
           pid file = /var/lock/rsync.lock

           &merge /etc/rsyncd.d
           &include /etc/rsyncd.d


       This  would merge any /etc/rsyncd.d/*.inc files (for global values that
       should stay in effect), and then include any /etc/rsyncd.d/*.conf files
       (defining modules without any global-value cross-talk).

AUTHENTICATION STRENGTH
       The  authentication protocol used in rsync is a 128 bit MD4 based chal‐
       lenge response system. This is fairly weak protection, though (with  at
       least one brute-force hash-finding algorithm publicly available), so if
       you want really top-quality security, then I  recommend  that  you  run
       rsync  over ssh.  (Yes, a future version of rsync will switch over to a
       stronger hashing method.)

       Also note that the rsync daemon protocol does not currently provide any
       encryption  of  the  data that is transferred over the connection. Only
       authentication is provided. Use  ssh  as  the  transport  if  you  want
       encryption.

       Future  versions of rsync may support SSL for better authentication and
       encryption, but that is still being investigated.

EXAMPLES
       A simple rsyncd.conf file that allow anonymous rsync to a ftp  area  at
       /home/ftp would be:

       [ftp]
               path = /home/ftp
               comment = ftp export area



       A more sophisticated example would be:

       uid = nobody
       gid = nobody
       use chroot = yes
       max connections = 4
       syslog facility = local5
       pid file = /var/run/rsyncd.pid

       [ftp]
               path = /var/ftp/./pub
               comment = whole ftp area (approx 6.1 GB)

       [sambaftp]
               path = /var/ftp/./pub/samba
               comment = Samba ftp area (approx 300 MB)

       [rsyncftp]
               path = /var/ftp/./pub/rsync
               comment = rsync ftp area (approx 6 MB)

       [sambawww]
               path = /public_html/samba
               comment = Samba WWW pages (approx 240 MB)

       [cvs]
               path = /data/cvs
               comment = CVS repository (requires authentication)
               auth users = tridge, susan
               secrets file = /etc/rsyncd.secrets



       The /etc/rsyncd.secrets file would look something like this:

              tridge:mypass
              susan:herpass


FILES
       /etc/rsyncd.conf or rsyncd.conf

ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       box; cbp-1 | cbp-1 l | l .  ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
       ity   network/rsync = Stability Volatile

SEE ALSO
       rsync(1)

DIAGNOSTICS
BUGS
       Please report  bugs!  The  rsync  bug  tracking  system  is  online  at
       http://rsync.samba.org/

VERSION
       This man page is current for version 3.1.2 of rsync.

CREDITS
       rsync  is  distributed  under  the GNU General Public License.  See the
       file COPYING for details.

       The primary ftp site for rsync is ftp://rsync.samba.org/pub/rsync.

       A WEB site is available at http://rsync.samba.org/

       We would be delighted to hear from you if you like this program.

       This program uses the zlib compression  library  written  by  Jean-loup
       Gailly and Mark Adler.

THANKS
       Thanks  to Warren Stanley for his original idea and patch for the rsync
       daemon. Thanks to Karsten Thygesen for his many suggestions  and  docu‐
       mentation!

AUTHOR
       rsync  was  written by Andrew Tridgell and Paul Mackerras.  Many people
       have later contributed to it.

       Mailing  lists  for  support   and   development   are   available   at
       http://lists.samba.org



NOTES
       This     software     was    built    from    source    available    at
       https://github.com/oracle/solaris-userland.   The  original   community
       source                was                downloaded                from
       http://rsync.samba.org/ftp/rsync/src/rsync-3.1.2.tar.gz

       Further information about this software can be found on the open source
       community website at http://rsync.samba.org/.



                                  21 Dec 2015                   rsyncd.conf(5)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
RSS ATOM XHTML 5 CSS3